Dump Rental Trailers
A hydraulic pump and 12V battery are contained in the toolbox in the A-frame of each unit. The pump is operated by means of a simple up/down hand control and drives a hydraulic cylinder/ram which actuates the dump mechanism of the trailer
The battery is charged while being pulled via the hot wire on the towing vehicle.
The full size 7′ x 14′ units are able to transport a skid steer via the two 6′ slide-out ramps and four welded D-rings inside the trailer.
6′ x 12′ Dump
Dimensions | |
|---|---|
| Inside Width: | 71″ |
| Inside Length: | 144″ |
| Inside Height: | – |
| Rear Door Width: | – |
| Rear Door Height: | – |
Hitch | |
| Hitch Style: | Bumper-Pull |
| Coupler: | Adjustable 2 5/16″ Ball or Pintle Ring |
| Coupler Height: | ≈ 22″ – 30″ |
| (Top of the Ball) | |
Running Gear | |
|---|---|
| Axle Quantity: | 2 |
| Axle Size: | 7,000 lbs |
| Wheel Size: | 16″ |
| Brake Type: | Electric |
Weights | |
| Tare Weight: | 3,900 lbs |
| Tongue Weight: | – |
| Load Capacity: | 10,000 lbs |
Features | |
| Doors: | – |
| Tie-Downs: | Deck D-Rings (Select Units) |
7′ x 14′ Dump
Dimensions | |
|---|---|
| Inside Width: | 83″ |
| Inside Length: | 168″ |
| Inside Height: | – |
| Rear Door Width: | – |
| Rear Door Height: | – |
Hitch | |
| Hitch Style: | Bumper-Pull |
| Coupler: | Adjustable 2 5/16″ Ball or Pintle Ring |
| Coupler Height: | ≈ 22″ – 30″ |
| (Top of the Ball) | |
Running Gear | |
|---|---|
| Axle Quantity: | 2 |
| Axle Size: | 7,000 lbs |
| Wheel Size: | 16″ |
| Brake Type: | Electric |
Weights | |
| Tare Weight: | 4,500 lbs |
| Tongue Weight: | – |
| Load Capacity: | 10,000 lbs |
Features | |
| Doors: | – |
| Tie-Downs: | Deck D-Rings |